数控仿形系统中的数字化技术

利用仿形仪扫描模型表面,自动生成描述模型表面的数控指令,实时转存到软磁 盘中。利用上述的数字化结果在数控功能支持下进行数字化加工,可以加工出各轴独 立改变比例的工件和镜像的工件,也可以实现阴阳模工件的配对加工。数字化技术在 模具及复杂表面加工中有童要意义。     

回流充气法处理中,高量含铁地下水的研究

本文介绍一种深井回流充气工艺,它兼具充氧和除铁综合性能的新型工艺形式,能改善含铁地下水的过滤性能.在此基础上提出了深井回流充气稳定期的概念,建立了深井回流充气系统中氧量的平衡关系.通过正交试验,提出了处理中、高量含铁地下水的推荐工艺流程和工艺参数.采用χ—射线衍射方法测试了井内铁泥和成熟滤料表面滤膜的成分和形态,分析了"充气"和"过滤》两过程中的除铁机理.     

煤炭企业固定工的地位及现存问题的改进

本文对当前煤炭企业用工制度改革存在的问题、改进途径和各种形式用工的比例进行了分析,并指出为适应煤矿安全生产及机械化发展的需要,保持固定工的用工比例,克服“铁饭碗在手”等隋性意识,充分发挥他们的骨干作用是问题的关键。为此,本文提出了改变工资结构、劳动结构等相应的改革措施。     

真空开关介质强度恢复的研究

电力系统的瞬态恢复电压对真空开关的介质强度恢复影响极大,根据是否考虑这一影响可把真空开关的介质恢复过程分为实际恢复过程和固有恢复过程。本文在相同的实验模型和电路参数下对这两种恢复过程作了比较性的实验研究。提出了“鞘层”与“金属蒸气”相结合的理论模型,并对相关的问题进行了讨论。     

电网谐波的微机检测和分析系统

为贯彻水电部《电力系统谐波管理暂行规定》文件,适应电网谐波检测管理的需要,研制了本装置。它在微处理机的基础上实现了对电网谐波的自动检测:能测量基波至19次谐波的电压、电流、相位、有功和无功功率,以及电压和电流的总畸变率。本文简述其工作原理、硬件框图、程序流程图、提高测量准确度的措施、测试结果等。     

化工过程能量综合知识表示的方法研究

剖析了人类专家进行化工过程能量综合的过程,简述了几种知识表示方法的优、缺点。分析了化工过程能量综合领域知识的种类和特点,提出了题域知识的“面向对象”表示方法。     

A parable of two princes: An effective approach to national development

The paper compares two opposite strategies for national development: (1) initially optimum policies in the absence of a strong feedback system and (2) initially poor policies with a strong feedback system. The strong feedback system is essentially a real-time information system designed to support national development. A number of principles or guidelines for implementing such a real-time information system are presented. The entire approach is based upon the viable system model of Stafford Beer.     

The in vivo expression of the globin genes of theβ cistron in γ-,δ-, andδβ-thalassemia heterozygotes

There is considerable evidence suggesting that the switch from to and chain production after birth is due, in part, to silencing of the genes by stage-specific factors which bind to their promoters and to the competition from the adult ( and ) genes for a common enhancer element located in the locus control region. As a consequence one can expect that the increased Hb F production in adults with hereditary persistence of fetal hemoglobin or -thalassemia is directed mainly by -globin genes in cis to the deletion(s) responsible for these conditions. Here we review data on heterozygotes with -, -, or -thalassemia, who also had an^AT mutation, in cis or in trans, which was used as a marker of gene expression. The results show that a deletion affecting adult genes favors the expression of genes in cis, while the deletion of a single gene does not affect the expression of the gene in cis but leads to a faster switch postnatally.     

Bovine microvascular endothelial cells of separate morphology differ in growth and response to the action of interferon-γ

Five cell types recently isolated from the bovine corpus luteum differed in their epithelioid morphology and their cytoskeleton, but shared common criteria of microvascular endothelial cells^1,2. To give strong evidence for the separate entity, the growth rate of the 5 phenotypically different cells was studied. They were seeded at low density on day 0. Most of these cells were treated with 200 to 1000 U recombinant bovine interferon- (IFN-) for 3 days. The untreated remainder served as controls. Cell counts were made for all cultures on days 4, 7, 10 and 13. morphology: 13 d after treatment with IFN- senescent cells as well as intact cells occurred in cultures of cell types 1 to 4. Cultures of cell type 5 were apparently unchanged and resembled their untreated counterparts. Desminpositive cells in cultures of cell type 2 developed cell processes. Growth rate: In the absence of IFN-, the growth rate was high for cell types 3 and 4, moderate for cell type 1, and low for cell types 2 and 5. The presence of IFN- caused anti-proliferative effects. These were higher for cell types 3 and 4 than for cell types 1 and 2. IFN- could be cytotoxic on cell type 3. In contrast, the cytokine tended to support the cell growth of cell type 5. These findings substantiate the postulate that endothelial cells exhibiting separate morphology in culture also function differently.     

轧制带材的瓢曲生成路径

通过建立冷轧带材屈曲失稳后的大位移变形模型,计算出复杂模态的瓢曲浪形生成路径,它包含着实际可能出现的各种附加应力和位移约束条件．实验证明这是可行的板形控制目标理论,解决了高技术轧机的板形设定问题．